Small Scale Lights by JS Miniatures

Due to the May bank holiday weekend orders placed after 12noon on Thursday 24th May will be processed w/c Tuesday 29th May.
There may be a 2-3 day delay while we clear the backlog but we will dispatch orders as quickly as possible. Thank you for your patience.

Flexible LED Strip - Non Wired

£0.99
Tiny 9-12 volt chip LEDs on a flexible self adhesive strip.   Non wired.

Specification:
  • Choice of 3, 6, 9, 12 or 15 LEDs per strip (3 LED strip is 50mm long, 6 LED strip is 100m long, each in increments of 50mm)
  • Wide angle, 120 degree LEDs
  • strip 8mm wide by 2mm deep
  • Bend radius of 20mm
  • LED type: SMD 3528
  • Non-waterproof
Options
Quantity

These tiny 9-12 volt LEDs are known as surface mount LEDs, SMD LEDs or chip LEDs which are on a flexible, 3M self adhesive strip for easy installation. They are perfect for simulating daylight in a window, garage strip lighting, scenics, railways, model railway buildings and other tiny models. They are very bright for their size.

They run off a 12 volt DC regulated transformer or a 9v PP3 battery but 9v option will be dimmer.

  • Choice of 3, 6, 9, 12 or 15 LEDs per strip (3 LED strip is 50mm long, 6 LED strip is 100m long, each in increments of 50mm)
  • Wide angle, 120 degree LEDs
  • strip 8mm wide by 2mm deep
  • Bend radius of 20mm
  • LED type: SMD 3528
  • Non-waterproof

12 volt option wires in directly. For 9 volt option you will need a 9v battery snap. You can run one or two strips off the one 9v/PP3 battery but the more strips you connect the quicker the battery will run down.

These are supplied without wires. You will need to solder wires on yourself or use a LED strip connector. Pre-wired LED strips are also available.

Available in:
Warm white (slightly yellow cast), Bright white (cooler cast, more modern look), Blue, Green, Red

© 2018 Small Scale Lights by JS Miniatures · All Rights Reserved.