A very easy to use lighting kit for Warhammer 40k landing pad models including 3mm or 5mm LEDs and a 3 volt battery with on/off switch.
Size of LED is personal preference but also depends on the size of your landing pad. 3mm LEDs are more in scale for most models but 5mm may be preferred for added effect / larger lights.
The resistor will be soldering into the wire, about half way along so it's not adding bulk to the LED for fitting into tight spaces.
- 8 x 3mm or 5mm LEDs in choice of colour (Optional second colour for 50:50 split)
- Rocker switch - pre-wired
- 1 x 3v AAA battery holder with integrated on/off switch
- 1 x connector block
Simply decide where you want the LEDs and drill a hole for the LED clips. Glue the clips in place and paint as desired then push the LED into the clip and fix the wires underneath. Connect the LED wires to the battery wires or transformer connector. The on/off switch can be placed in an inconspicuous place on the model and a hole drilled for the switch to pop through then glued in place.
Photo above shows a customer image of lighting for a Forge world Mortalis Theta Complex.