Created with Sketch. Created with Sketch.

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Due to a family emergency we are currently unable to fulfil new orders in December 2019. Please do not order if you need your items before January 2020.

Connectors

  • 3 Amp Screw terminal connector blocks

    3 Amp Screw terminal connector blocks

    Comes in a strip of 6 blocks.Easy to separate into individual blocks. Just cut or snap off.Simply wire in the battery wires to one side and the LED wires to the other matching red to red and black to black. Screw down to secure. 3 amp Screw Terminal...

    £0.99
    Add to Cart
  • 5 Amp Screw terminal connector blocks

    Comes in a strip of 6 blocks.Easy to separate into individual blocks. Just cut or snap off.Simply wire in the battery wires to one side and the LED wires to the other matching red to red and black to black. Screw down to secure. 5 amp Screw Terminal...

    £0.75
    Add to Cart
  • Heat shrink tubing - Black

    Comes in three sizes with a 2:1 shrink ratio: 1.6mm shrinks to 0.8mm - used to protect joins to LEDs and 1-2 very thin wires 2.4mm shrinks to 1.2mm - used to protect joins of more than 2 wires 3.2mm shrinks to 1.6mm - used to protect joins of more...

    £0.10
    Choose Options
  • Heat shrink tubing - Red

    Comes in two sizes with a 2:1 shrink ratio: 1.6mm shrinks to 0.8mm - used to protect joins to LEDs and 1-2 very thin wires 2.4mm shrinks to 1.2mm - used to protect joins of more than 2 wires 3.2mm shrinks to 1.6mm - used to protect joins of more...

    £0.10
    Choose Options
  • JST Mini 1.25mm 3 Pin Connectors

    JST Mini 1.25mm 3 Pin Connectors, male & female with 100mm long wires. One pair of connectors. Specification: Mini JST 1.25mm connectors Wires: 100mm long, 0.9mm external dia JST Connectors: 5.1mm x 3mm x 9.1mm (W x D x L) Male & Female

    £0.50
    Add to Cart
  • LED Holder - Solderless

    LED Holder - Solderless

    A simple holder for standard LEDs. No soldering required. Simply push the legs of the LED into the holder and connect the leads to a battery. Photos show one in use.The positive (longer) leg of the LED fits into the red side of the holder. The...

    £0.95
    Add to Cart
  • Micro plug connectors Micro plug connectors

    Micro Plug Connectors

    Very simple pre-wired two pin connector for easy plug and go connections for your lighting projects. Comes with 10" wire Micro size - only 6.5mm long when connected Simple to connect and disconnect your LEDs from your battery or power source...

    £2.25
    Add to Cart