Small Scale Lights by JS Miniatures

0.75mm Fibre Optic Rainbow Kit

£9.25
Special effects fibre optic loom kit with 3v battery holder & on/off switch. Rainbow effects ideal for cockpit displays, computer screens or other special effects in models.

Kit includes:
  • 1 x colour changing 5mm LED with 5 x or 10 x 0.75mm fibre optics strands attached with choice of colour, 5" (13cm) long strands
  • 1 x 3v coin cell battery holder with mini on/off switch or 3v AAA battery box
  • 1 x connector block
  • PDF Instructions with photos
  • These need to be run separate to static lights in case of carryover of flash with coin cell batteries

  • Video below
Options
Extras
Quantity

Special effects fibre optic loom kit with 3v battery holder & on/off switch. Colour changing lights ideal for cockpit displays, computer screens or other special effects in models.
0.75mm strands are fairly flexible with a minimum bend radius of 15mm.
This is PMMA cable which is inductrial grade fibre.
Perfect for providing small pinpoints of light where LEDs would be too large.


Possible uses include:
Warhammer models for console lights, guns, Sci Fi models, spaceship consoles, dash board lights, computer consoles etc

Installation is best done before gluing the model together so wiring can be hidden in the shell of the model. Holes are best drilled before painting.

Fibre optic strands will be left 5 inches long for trimming to correct length after installation.

Kit includes:

  • 1 x Colour changing 5mm LED with 5 x or 10 x 0.75mm fibre optics strands attached with choice of colour, 5" (13cm) long strands
  • 1 x 3v coin cell battery holder with mini on/off switch or 3v AAA battery box
  • 1 x connector block
  • PDF Instructions with photos
  • These need to be run separate to static lights in case of carryover of flash with coin cell batteries

Please Note: I'm very sorry but due to Royal Mail Regulations coin cell batteries can no longer be sent through the post so a battery can not be included with your order.


Full step by step instructions will be included but these are fairly simple to install. Installation is best done before gluing the model together so wiring can be hidden in the shell of the model. Holes are best drilled before painting. Choose where you want the fibre optic strands to go and drill a hole of the appropriate size, glue in place with hot melt glue and connect the LED wires to the battery wires using the connector block.

© 2018 Small Scale Lights by JS Miniatures · All Rights Reserved.