Random flickering LEDs. They have a special chip inside so the flicker is random rather than the on/off flash of other flashing LEDs. An amber/orange or red LED would be perfect in a fireplace to create that real fire effect. You can even combine them with solid LED's for a really realistic effect.
Check out our flickering fire kit or Burning Building Kit
- 3mm Flickering pre-wired LED
- Random flicker from integrated chip
- Wire length: 10" standard wire
These are provided with a resistor wired in to ensure both the LED and battery last longer. The resistor is usually near the plug end to unsure it doesn't get in the way. For a flickering fire you can use either a CR2032 or 2 x AAA battery kit but if you are using more than 3 LEDs in your circuit you would be best using our 2 x AAA battery kit to ensure nice and bright LEDs and consistent results.
These flickering LEDs do not normally cause carryover to static LEDs but it can occasionally be a problem with coin cell batteries.
Also available in a 4.5 volt, 6 volt, 9 volt and 12 volt option (with resistor wired in). Please select from the drop down menu.