These small 9-12 volt LEDs are known as surface mount LEDs, SMD LEDs or chip LEDs which are on a flexible, 3M self adhesive strip for easy installation. They are perfect for simulating daylight in a window, garage strip lighting, scenics, railways, model railway buildings and other tiny models. They are very bright for their size. They run off a 12 volt DC regulated transformer or a 9v PP3 battery but 9v option will be dimmer.
- Choice of 3, 6, 9, 12 or 15 LEDs per strip (3 LED strip is 50mm long, 6 LED strip is 100m long, each in increments of 50mm)
- Wide angle, 120 degree LEDs
- strip 8mm wide by 2mm deep
- Bend radius of 20mm
- LED type: SMD 3528
12 volt option wires in directly. For 9 volt option you will need a 9v battery snap. You can run one or two strips off the one 9v/PP3 battery but the more strips you connect the quicker the battery will run down.
They come pre-wired with 12 inches of standard wire or 60cm of white twin core wire. Longer lengths available on request. If you would like to add the wires yourself then you can also buy the strips without wires
Available in: Warm white (slightly yellow cast), Bright white (cooler cast, more modern look), Neutral White (no cast), Blue, Green, Red.