A very easy to use lighting kit for Warhammer 40k Rogal Dorn Battle Tank
Kit includes 3mm LEDs and a 6 volt coin battery holder with on/off switch.
Installation is best done before gluing the model together so wiring can be hidden in the shell of the tank. Holes are best drilled before painting.
***Tank is for illustration purposes only and is NOT included***
Kit includes:
- 4 x 3mm LEDs in warm white and red (2 x headlights & 2 x rear lights)
- 1 x 6v CR2032 coin cell battery holder with mini on/off switch
- 1 x connector block
- PDF Instructions with photos
***Please Note: I'm very sorry but due to Royal Mail Regulations coin cell batteries can not be sent through the post so a battery can not be included with your order. ****
Full step by step instructions will be included but these are fairly simple to install. Installation is best done before gluing the model together so wiring can be hidden in the shell of the tank. Holes are best drilled before painting. Choose where you want the LEDs to go and drill a hole of the appropriate size, glue in place with hot melt glue and connect the LED wires to the battery wires using the connector block. The wiring can be hidden in the interior of the model and a hole drilled in the base for the mini on/off switch to pop through then glued in place. The coin cell battery is small enough to be easily hidden inside the model.
